Library  Articles

---

• Retrospective Clinical Evaluation of Tapered Screw-Vent Implants: Results After up to Eight Years of Clinical Function (165KB)
  Z. Ormianer and A. Palti
  (A1015)

• Improving denture stabilization with the ERA Mini^TM implant (1.27MB)
  G. Kurtzman and D. Dompkowski
  (4738, Rev. 12/10)

• Subantral Augmentation Utilizing the Zimmer® Sinus Lift Balloon Technique (1.08MB)
  Geraldo Nicolau Rodrigues, Americo Yuti Katayama, Ronald F. Cardoso
  (1346, Rev. 1/10)

• Osteoinductivity of Puros DBM Putty in Athymic Rat Model (3MB)
  S. Moore and R. Cobb
  RTI Biologics, Inc. (1119, Rev. 2/09)
  As seen in Dental Inc.

• Modification of a Conventional Denture for Use as an Implanted-Retained and Stabilized Overdenture (1MB)
  M. Collins and M. Warner (4738, Rev. 8/09)

• Osteoinductivity of Puros DBM Putty in Athymic Rat Model (3MB)
  S. Moore and R. Cobb
  RTI Biologics, Inc. (1119, Rev. 2/09)

• Puros Demineralized Bone Matrix: Patient Safety Through Redundant Safeguards (180KB)
  Zimmer, Inc. (1109, Rev. 2/09)

• Effect of Terminal Gamma Sterilization on Osteoinductivity (127KB)
  C. Nataraj, E. Silveira, J. Clark, J. Yonchek, and J. Kirk (1140, Rev. 2/09)

• Histology of Surgically Implanted Tutoplast Processed Dermis (4MB)
  D. Greenspan, R. Hernandez, and J. Faleris (1077, Rev. 4/09)

• Puros Demineralized Bone Matrix: Patient Safety Through Redundant Safeguards (245 KB)
  RTI Biologics, Inc. (1103, Rev. 1/09)

• The Tutoplast Process: A Review in Efficacy (274 KB)
  C. Schoepf (A1019)

• Management of the extraction socket: Site preservation prior to implant placement (466 KB)
  B. Danesh-Meyer

• Ridge Preservation & Augmentation Using Regenerative Materials to Enhance Implant Predictability and Esthetics (722 KB)
  D. Keith & M. Salama (A965)

• Heat generation in one-piece implants during abutment preparation with high-speed cutting instruments (280 KB)
  W. Joo (A998)

• Allograft Safety: Efficacy of the Tutoplast Process (955 KB)
  C. Schoepf (A815)

• Zimmer® Contour Ceramic Abutments Precision-Engineered for Strength, Esthetics and Clinical Versatility (350 KB)
  W. Joo (A985)

• One-piece and Two-Piece Implants Demonstrate Comparable Stress Levels in Bone: Preliminary Results of an FEA Study (199 KB)
  S. Zamani (A991)

• The Evolution and Evaluation of Two Interference-Fit Implant Surfaces (1MB)
  P. Binon (A959)
  *As seen in Postgraduate Dentistry

• A Comparison of Three Mechanical Properties of Four Implant Designs (1MB)
  C. Basten (A958)
  *As seen in Postgraduate Dentistry

• Management of the Compromised Intertooth Space with Small-Diameter One-Piece Implants in the Esthetic Zone (688KB)
  P. Petrungaro (A956)
  *As seen in Functional Esthetics and Restorative Dentistry

• The Use of a Mineralized Allograft for Sinus Augmentation: An Interim Histological Case Report from a Prospective Clinical Study (9MB)
  S. Froum (PN A721)

• A Review of Zimmer-Coated Dental Implants (2.3MB)
  O. Tanaka (PN A934)
  *Reprinted with permission from Dental Asia, May/June 2007.

• Smart Steps to Immediate Implant Impressions (1.5MB)
  J. Rosenlicht (PN A621)

• All Ceramic Restorative System for Esthetic Implant-Supported Crowns: In Vitro Evaluations and Clinical Case Report (152KB)
  P. Castellon (PN A639)

• A569 SwissPlus(tm) Implant System, Part 1: Surgical Aspects and Intersystem Comparisons, Vol. 11 #2 (2.3KB)
  Joel L. Rosenlicht, DMD, Implant Dentistry
  *Lippincott, Williams and Wilkins, publisher, permits the printing of one copy of this article per viewer/site visitor. Additional copies should be purchased directly from the publisher.

• A568 SwissPlus(tm) Implant System, Part 2: Prosthodontic Aspects and Intersystem Comparisons, Vol. 11 #3, pp249-255 (1.8KB)
  Joel L. Rosenlicht, DMD, Implant Dentistry
  *Lippincott, Williams and Wilkins, publisher, permits the printing of one copy of this article per viewer/site visitor. Additional copies should be purchased directly from the publisher.

• Highly Crystalline MP-1^TM Hydroxylapatite coating Part I (4.8KB)
  Ann V. Burgess, et al

• Highly Crystalline MP-1^TM Hydroxylapatite coating Part II (5.4KB)
  Ann V. Burgess, et al

• Immediate Implant Placement and Provisionalization (206KB)
  Paul S. Petrungaro, DDS, MS

• Using Platelet-Rich Plasma (205KB)
  Paul S. Petrungaro, DDS, MS

• Immediate Loading of Dental Implants in the Edentulous (163KB)
  Azfar A. Siddiqui, DMD, BDS, MSc

• PureForm Ceramic Restorative System (235KB)
  Paulino Castellon, DDS,* James L. Soltys, DDS

• Dental Implants in the Esthetic Zone
  Abdel El Salam El Askary, BDS

• Clinical Dilemmas: Restoration of Posterior Quadrants in the Partially Edentulous Dentition -- 9 Year Retrospective Cumulative Study
  Martin Gross, BDS, LDS, MSc

• Determining The Right Occlusal Scheme for Dental Implants
  Marcel G. Le Gall, DDS

• Should Implant Superstructures Be Screw- Retained Or Cement-Retained?
  Rainer Niess, DDS

• Achieving Optimal Implant Placement Using Mandibular Block Autografts: A Biological and Biomechanical Approach to Avoid Functional and Esthetic Complications
  Michael A. Pikos, DDS

• Clinical Evaluation of the Spline Interface
  Philippe Russe, DDS

• Implant Surfaces: Present and Future
  Paolo Trisi, D.D.S., Ph.D.

• Immediate Loading of AdVent™ Implants with a Mandibular Bar Overdenture Restoration: Technique from an International, Prospective, Multicenter Study
  Azfar A. Siddiqui, DMD, BDS, MS

• The Nonfunctional Immediate Provisional in Immediate Extraction Sites: A Technique to Maximizes Esthetics
  William M. Locante, DDS